Print Marketing Tips

For inquiry, please call at 1-800-423-2679

About Flag Holder Hardware

 

At a busy festival or market, rows of canopies start to look the same. A flag rising above your tent changes that - it moves in the breeze, catches the eye from across the lot, and tells visitors exactly where to find you. Flag Holder Hardware mounts an advertising flag directly to a leg of your event tent, so there is no separate flag base to carry, fill, or trip over.

The complete kit has three pieces: a metal flag adapter that fits into the base of your flag pole, plus two hex clamps - one straight and one offset - that lock onto the tent leg. It holds one small or medium feather or teardrop flag and works on any leg of a tent with hex-shaped aluminum legs. Need a replacement part? The flag attachment and the clamps are also sold on their own.

Product Specifications

 
Complete Kit 3 pieces - flag attachment + 2 hex clamps
Flag Attachment Metal adapter that fits into the base of the flag pole
Hex Clamps 1 straight clamp and 1 offset clamp
Capacity Holds 1 flag
Flag Types Small or medium feather and teardrop flags
Shipping Ground, 3 Day Select, or 2nd Day Air - pricing includes shipping

Before You Order

 
Tent Legs For event tents with hex-shaped aluminum legs
Mounting Any leg of the tent
Flag and Pole Not included
Tent Not included - Event Tent Frame sold separately
Artwork None required - no file upload needed

Hardware Options

 

Order the complete kit for a new flag setup, or pick up just the part you need to replace a lost or damaged piece.

Flag Attachment with 2 Hex Clamps

Flag Attachment + 2 Hex Clamps

The complete 3-piece kit: the metal flag adapter plus a straight and an offset clamp. Everything you need to mount one flag to your tent.

Flag Attachment Only

Flag Attachment Only

The metal adapter by itself. Ideal if you already own hex clamps and only need to replace or add the flag connector.

2 Hex Clamps Only

2 Hex Clamps Only

A straight clamp and an offset clamp without the flag adapter. Use them to replace worn or missing clamps.

Two Clamps, Two Jobs

 

The kit includes two different hex clamps that work together to hold the flag steady on the tent leg.

Straight Clamp

Grips the tent leg and holds the flag attachment in line with the leg for a secure, upright mount.

Offset Clamp

Positions the flag slightly away from the leg so the pole clears the tent frame and canopy edge.

Common Uses for Flag Holder Hardware

 
Farmers Markets and Vendors

Farmers Markets and Vendors

A flag above the booth helps regular customers find you quickly, even in a crowded market row.

Outdoor Events and Festivals

Outdoor Events and Festivals

Sponsors and exhibitors add height and movement to their booth so it stands out from the tents around it.

Schools and Sports Teams

Schools and Sports Teams

Fly a team or school flag on the sideline tent so players and families can spot home base from across the field.

Businesses and Nonprofits

Businesses and Nonprofits

Show your logo high above community fairs and fundraisers without carrying a separate flag base.

How to Order

 
1

Choose Your Hardware

Select the complete kit, the flag attachment only, or the 2 hex clamps only.

2

Enter Your Quantity

Order one kit for each flag you want to fly from your tent.

3

Pick Shipping

Choose Ground, 3 Day Select, or 2nd Day Air. Pricing includes shipping.

4

Clamp and Fly

Clamp the hardware to a tent leg, seat your flag pole, and raise your flag.

Frequently Asked Questions

 

What comes in the complete Flag Holder Hardware kit?

The complete kit includes three pieces: a metal flag attachment that fits into the base of your flag pole, one straight hex clamp, and one offset hex clamp. Together they mount a single flag to the leg of your event tent. The flag, flag pole, and tent are not included. If you only need part of the kit, the flag attachment and the pair of hex clamps are each available on their own.

What type of flag can I use with this hardware?

The flag attachment is designed for small and medium feather flags and teardrop flags. These flag shapes use a sectional pole that slides into the metal adapter at its base. Large feather and teardrop flags are not recommended, because their added height and wind load put more force on the tent leg than the hardware is designed to handle. Each kit holds one flag.

Will it fit my tent?

The hex clamps are made for event tents with hex-shaped aluminum legs - the six-sided leg profile used on many commercial pop-up tent frames. Before ordering, check the shape of your tent legs. If your tent has round or square legs, or you are not sure, call us with your tent details and we will help you confirm fit before you order.

When should I attach the flag during setup?

Set up the tent completely first - frame open, canopy on, legs raised to your final height, and sandbags in place. Then clamp the hardware to the leg you have chosen, seat the base of the flag pole into the flag attachment, and raise the flag. Adding the flag last keeps it out of the way while you work on the tent and makes sure the leg is already weighted before the flag starts catching wind.

Which tent leg should I mount the flag on?

The hardware can be clamped to any leg of the tent. Most customers choose a front corner leg so the flag is visible to people approaching the booth, or the corner closest to the main walkway. At the end of a row, a back corner facing the crowd also works well. Avoid placing the flag where it will brush against a neighboring tent or block a walkway.

Why are there two different clamps?

The two clamps work together to hold the flag steady. The straight clamp grips the tent leg and keeps the flag attachment in line with it, while the offset clamp holds the flag slightly away from the leg so the pole clears the frame and canopy edge. Using both gives the flag two points of contact on the leg, which keeps it upright and reduces wobble in the wind.

Can I buy just the clamps or just the flag attachment?

Yes. Choose Flag Attachment Only if you already have hex clamps and need a new or additional flag connector. Choose 2 Hex Clamps Only to replace clamps that are worn, damaged, or lost. Ordering individual parts is a simple way to keep your setup complete without buying a new kit every time a piece goes missing.

Do I need tent weights when flying a flag?

Yes. A flag catches wind and adds force to the tent leg it is mounted on, so your tent should always be weighted when a flag is attached. Place a sandbag on every leg, and pay particular attention to the leg holding the flag. On very windy days, consider lowering the flag to protect both the flag and your tent.

Can I fly more than one flag from my tent?

Each kit holds one flag, but you can mount additional kits on other legs of the tent. Many booths fly two flags on the front corners for a balanced, symmetrical look. Order one complete kit for each flag you want to fly, and make sure every leg is weighted.

Do I need to upload artwork?

No. Flag Holder Hardware is an unprinted product, so there is no file to prepare, no proof to approve, and no upload step. Choose your hardware option, quantity, and shipping method and add it to your cart. Pricing includes shipping, and we ship to all 50 states by Ground, 3 Day Select, or 2nd Day Air.

You May Also Like

 

Questions About Your Flag Hardware Order

Our team can help you confirm fit with your tent legs and plan the accessories for your next event.

Contact Us1-800-423-2679

Join Us!

We’ll send offers and updates about our latest products just for you.